Reverse osmosis systems

The PERMO PERMAQ ECO, with its wall mounting and efficiency over 75%, reconciles water purity with cost and bulk constraints. Any risks of bacteriological contamination are reduced by its “Full-fit” hydraulic design, with no backwaters and automatic rinsing of the osmosed water.

PERMAQ ECO eliminates practically all ions (dissolved salts, nitrates, etc), suspended matter, bacteria, organic matter (pesticides, haloforms, bad taste, etc), and toxic heavy metals present in water.

The use of low pressure industrial osmosis membranes and its innovative design guarantee water loss of only 25% instead of the usual 40% – 50%.

This osmosis unit is ideal for a variety of applications:

• Air conditioning
• Misting
• Restaurants
• Analytical laboratories
• Sterilisation
• Hotels
• Industry

An electronic control system ensures that the PERMO PERMAQ ECO is entirelyautomated. A built-in screen allows conductivity to be monitored continuously while operating data is displayed.

In health care, catering and air conditioning, water quality must be pure. PERMO PERMAQ PICO reverse osmosis systems are compact ready-to-use units for the production of osmosed water on site. Their design incorporates all internal connections, together with measurement and controls components.

This osmosis unit is ideal for a variety of applications:

• Industry
• Rinsing of mechanical parts
• Optics
• Restaurants
• Laboratories
• Air conditioning
• Hotels

The PERMO PERMAQ PICO electronic control ensures continuous monitoring of operating parameters. A group of indicator lights display the operating status of the osmosis unit.

PERMO PERMAQ COMPACT 41/51 osmosers provide demineralised water at rates of more than 130 litres/hour with residual conductivity lower than 50 microSiemens. Taking up a minimum of space, these osmosis units can be integrated into autonomous ON-LINE distribution systems or OFF-LINE, with storage tanks and recirculation systems.

This osmosis unit is ideal for equipment used for:

• Rinsing
• Cooking
• Steam
• Steaming
• Humidification

The PERMO PERMAQ COMPACT 41/51’s electronic control system ensures simple, entirely automated control of all operations (water level monitoring, valve closure, pressure switch control)

The PERMO PERMAQ COMPACT osmosis system is a compact unit with an osmosed water production unit, a storage tank (100 litres or 270 litres) and a distribution system. Compact and well-finished, it is very easy to install, as all its equipment is fitted and inspected in the factory.

The osmosis unit, fitted with guide rollers, can be easily installed under a table while remaining easy to service. The PERMO PERMAQ COMPACT is designed for a minimum of maintenance and extended working life.

This osmosis unit is ideal for the following applications:

• Air conditioning
• Agro-food industry
• Printing
• Hospitals
• Hotels
• Laboratories

The PERMO PERMAQ COMPACT’s electronic control system ensures simple, entirely automated control of all operations (water level monitoring, valve closure, pressure switch control)

Used mainly in industry or the medical field, PERMO PERMAQ DELTA osmosis units guarantee the production of water close to 0.2 mU/cm (5 µS/cm) over a range of flow rates from 200 l/hr to 3200 l/hr. These models, comprising a reverse osmosis skid, are mounted on a s/s frame, ready to be connected hydraulically and electrically.

The entire DELTA range is fitted with an LCD screen for continuous display of all the water quality and operating parameters.

All the equipment, valves, pressure switches and pumps, is managed automatically via the Membrane Control electrical control box.

PERMO SEA WATER osmosis units are used for treating sea water with a high mineral salt content (30-45 g/litre) To take up a minimum of space and make installation easy, they are mounted on a frame (10 m3 / day) or in a 20′ or 40′ container (> 10 m3 / day).

Fitted with an ERS (energy recovery system), they ensure water production with low energy consumption( 3 – 4 kWh/m3) These units provide from 10 m3 to 1000 m3 of drinking water per day.

Used in industrial water treatment chains, PERMO PERMAQ SIGMA osmosis units guarantee the production of water close to 0.2 mU/cm (5 µS/cm) over a range of flow rates from 4 m³/hr to 42 m³/hr. These models, comprising a reverse osmosis skid, are mounted on a s/s frame, ready to be connected hydraulically and electrically.
The entire PERMAQ SIGMA range is fitted with an LCD screen for continuous display of all the water quality and operating parameters.

All the equipment, valves, pressure switches and pumps, is managed automatically via the PERMO CONTROL II electrical control box.

PERMO PERMAQ SIGMA osmosis units are available in High Pressure (HP) and Low pressure (LP) versions

The “PERMAQ SIGMA” reverse osmosis skid comprises :

• Automatic plumbing fixtures
• Safety devices (pressure meters, valves, pressure switch, etc)
• Flow meters
• High pressure pump
• Reverse osmosis modules (pressure casing and membranes)
• Automatic measurement of quality of osmosed water
• Control cabinet with the osmosis unit control box